technical data:battery voltage: 40 vxgt power supplybldc - brushless dc motoridle speed:0 - 1100 / 2100 / 3200 / 3700 min?1max torque: 20 / 50 / 170 / 220 nmstandard screw tightening range: m5 - m16machine screws: m4 - m8high tensile strength screw: m5 - m14freq. Impact rate at idle: 0 - 1400 / 2600 / 3600 / 4600 min?1sound power level: 105 db(a)sound pressure level: 94 db(a)noise factor: 3 db(a)vibration level (3 axes) mounting screw: 12.9 m/s2vibration coefficient k h: 1.5 m/s2machine weight with battery: 1.7 - 2.9 kgdimensions (l x w x h): 119 x 86 x 252 mmbattery type: li-iondrive shaft: 1/4 weight: 1.0 kg6 screwdriving assistant options:- a operating mode - in this mode the tool starts screwing at low speed then switches to the impact mode and increases the speed until maximum speed is reached- t operating mode for thick sheet metal - a special mode for optimal and fast screwing in of self-drilling screws- t operating mode for thin sheet metal - the device stops automatically after 3 impacts- screw mode with automatic stopping of the device when tightening/loosening screws and nuts (3 mode settings for both tightening and loosening screws and nuts).with a quick mode change function. 4 leds located around the tool handle illuminate the work area and have a delayed extinguishing function. It has 3 brightness settings for the work area illumination. With the possibility of using the work light as a flashlight.xpt technology is used here meaning increased resistance to dust and moisture. Reduced resistance in the tool handle facilitates bit installation. The ergonomically designed handle is covered with elastomer. The maximum torque of the impact driver is 220 nm.user benefitsergonomically designed handle with a soft grip provides greater comfortelectric brake for maximum performance and greater operator safetyxpt technology designed for increased resistance to dust and moisture in harsh jobsite conditionsbattery protection circuit protects against overload over-discharge and overheating**
