Hydraulic Cutter For Sheet Metal Holes

a kit for cutting round holes in sheet metal with diameters ranging from 22-60 mm. The head of the manual hydraulic actuator can be rotated 360 degrees. It is designed for cutting holes in the production of distribution cabinets for mounting boxes or switches. When cutting holes the sheet metal surface is not deformed or damaged. The kit is easy to transport - packed in a durable carrying case. Includes dies and punches for cutting holes with diameters of 22 mm/0.9 27.5 mm/1.1 34 mm/1.3 43 mm/1.7 49 mm/2.0 60 mm/2.4. The pressure on the material during cutting is approx. 6 tons. Suitable for cutting holes in steel sheets stainless steel sheets and non-ferrous metals. The thickness of the cut material depending on its type is up to approx. 3 mm. The set includes 6 pairs of cutting dies /punch and matrix/ fi 22 27.5 34 43 49 60 mm 2 mounting mandrels 7/16x3/4 inch and 3/4x3/4 inch a manual actuator and 1 sealing setpurpose / application:for quick cutting of large precise holes in sheet metal with diameters from 22-60 mmhow to use:according to the attached instruction manual.put the appropriate mounting mandrel connected to the actuator through the drilled material mount the punch on it on one side of the material and the matrix on the other. Using the actuator pull the mandrel causing the material to be cut.manual actuator with a rotating headcutting punches 22 mm/0.9 27.5 mm/1.1 34 mm/1.3 43 mm/1.7 49 mm/2.0 60 mm/2.4dies suitable for punches - 22 mm/0.9 27.5 mm/1.1 34 mm/1.3 43 mm/1.7 49 mm/2.0 60 mm/2.4mounting mandrels 7/16x3/4 inch and 3/4x3/4 .sealing setall packed in a suitcase.**photos they serve an illustrative purpose.