description:the spray gun is used for painting. Compressed air is essential for the proper operation of the gun. The paint from the gun's reservoir and the compressed air supplied to the gun create a mixture of paint particles and air at the outlet of the gun nozzle.instructions for usegetting started using a wrench tighten the nozzle. Check the tightness and security of the compressed air supply system connections. Blow out the air supply hose before connecting it to the system. Before using the gun make sure it has been properly cleaned and maintained. Make sure the coating material tank is connected properly.spray jet width adjustment the width and shape of the spray jet can be changed by rotating the air nozzle. The shape of the jet can be smoothly adjusted from flat to round depending on your needs. The coating material volume adjustment knob determines the amount of coating material delivered to the air stream. The spray adjustment knob sets the intensity of the coating material-air mixture. It is recommended to adjust the mixture jet to obtain the smallest possible particles of coating material which will ensure better distribution of the coating material on the surface.gun operationwhen using the gun maintain a distance of 10 to 15 cm between the gun outlet and the surface being coated. Try to keep the gun outlet perpendicular to the surface being coated. Avoid arcing movements as they will cause uneven distribution of the coating material. It is recommended to apply several thin layers rather than one thick one.air flow adjustment depending on the type of coating material adjust the amount of compressed air by adjusting the air pressure control knob.nozzle replacement make sure to replace the entire nozzle assembly. The assembly includes a coating material nozzle a needle and an air nozzle.needle seal check the tightness of the needle seal during operation. If the seal is significantly worn replace it during periodic inspection of the gun using a wrench to remove the seal assembly.cleaning and maintenance after finishing work disconnect the gun from the compressed air system and empty the tool reservoir of any remaining coating material. Thoroughly clean the reservoir of any remaining coating material. Carefully clean the entire coating material conveyor path. Inadequate cleaning will reduce the coating material flow parameters. Clean the air nozzle with a brush dipped in solvent. Never immerse the entire gun in solvent. Never clean clogged holes with hard objects as even minor internal damage can adversely affect the spray jet parameters. After washing the gun apply a small amount of lubricant to the moving parts of the seals. Tighten the coating material nozzle enough to avoid leaks and ensure smooth needle movement.technical data:- index number yt-2346- gross weight (kg) 1.2300- pressure [bar] 3- nozzle size [mm] 1.8- quick connector size [inch] 1/4- flow rate [l/min] 380- capacity [l] 1.0
Frequently asked questions
Most orders are delivered within 2-5 business days in the Netherlands and Belgium. International orders may take 5-10 business days.
Yes, you can return your order within 30 days of receipt. The product must be unused and in its original packaging.
Shipping is free for orders over €100. For orders under €100, shipping costs are €4.95.
Check the size chart on the product page. Measure your body and compare with the chart. If in doubt, you can always contact us via WhatsApp or email.
The specifications per product state the water column value. A value of 5,000 mm or higher means the product is waterproof for normal use in rain and snow.
Why Glemo?
✔ Free shipping from €100
✔ Secure payment with iDEAL, credit card & PayPal
✔ 30-day return policy & free returns
✔ Shipped within 1 day
View our products