Cutting Disc 24/0.64mm 36 Pcs.

technical data:shank diameter: 3.2 mmcutting depth: 24.0 mmmax. Working depth: 10.0 mmwidth: 24.0 mmlength: 24.0 mmheight: 1.0 mmmaximum rotational speed: 35000/min.the disc is suitable for cutting off making straight cuts and notches in various types of metals e.g. Hardened steel sheet metal or aluminum. Easily cut screws and bolts or make slots in rusty or stripped screws and bolts to remove them with a screwdriver.use this blade with the 402 arbor: unscrew the top screw on the arbor with a wrench insert the screw into the center hole of the blade and tighten it onto the arbor.when using metal cutting blades remember to cut at high speed and with light pressure. The blades will last longer and cut faster if you apply little pressure to the tool while cutting. This also reduces the risk of blade breakage.as blades wear over time the diameter of the blade will decrease. If the blade becomes too small to make the cut stop using it and replace it with a new one.when using a cutting blade we recommend holding the tool with both hands (golf grip) and setting the blade at the correct angle. Tilting the blade while cutting can cause it to break.the cutting blade can be used on various types of metal such as aluminum copper and cast iron as well as for short cuts in plastic or brick.for materials such as galvanized metal (ventilation ducts) or hardened steel it is best to use a reinforced cutting blade (426).recommended speed:aluminum: 35000 rpm.brass: 35000 rpm.copper: 35000 rpm.plastics: 10–15000 rpm.steel: 35000 rpm.package contents: 36 pcs.**illustrative photo.